Toray MBR
MBR (Membrane Bioreactor) process is a combination of biological wastewater treatment and filtration. Biodegradable pollutants are reduced using bacteria and microorganisms. Following biological treatment, activated sludge is separated from the treated water by Toray's PVDF flatsheet membrane with a nominal pore size of 0.08 microns densely distributed along the membrane surface.
The TMR140 series is Toray's first-generation MBR module. It is certified by the California Department of Public Health (CDPH) as an acceptable filtration technology for compliance with the State of California Water Recycling Criteria (Title 22) since October 2008. Title 22 approved membrane technology is also applied to NHP series.
OVERVIEW Toray MBR NHP210 SERIES
NHP210 SERIES
NHP210 series improves membrane packing density against TMR140 series by Toray's unique element fabrication technology, then that leads 50 percent increase in capacity at the same footprint and lower air scour requirement of rigid plate MBR models.
Swipe to see the rest
Description | Model | Cassette Type | Composition | Number of Membrane Sheets |
Membrane Area [m2] |
Data Sheet |
---|---|---|---|---|---|---|
Standard model | NHP210-300S | ECS035 | 3 cassettes x 2 decks |
300 | 210 | Get PDF |
Small footprint model | NHP210-600D | 3 cassettes x 4 decks |
600 | 420 |
TMR140 SERIES
TMR140 series is Toray's first generation MBR module and suitable for midium ~ large capacity facilities.
Swipe to see the rest
Description | Model | Element Type | Number of Membrane Sheets |
Membrane Area [m2] |
Data Sheet |
---|---|---|---|---|---|
Standard model | TMR140-100S | TSP-50150 | 100 | 140 | Get PDF |
Small footprint model | TMR140-200D | 200 | 280 | ||
For large capacity | TMR140-400DW | 400 | 560 |
TMR090 SERIES
TMR090 series is suitable for small capacity facilities, containerized package plants and places with height limitation.
Swipe to see the rest
Description | Model | Element Type | Number of Membrane Sheets |
Membrane Area [m2] |
Data Sheet |
---|---|---|---|---|---|
Standard model | TMR090-100S | TSP-50100 | 100 | 90 | Get PDF |
SPARE PARTS
Toray recommends you to replace spare parts such as rubber fixing gaskets periodically in order to provide you excellent permeate water at all time. Below shown are the most common spare parts available from Toray.
Please contact us for the details of the specifications and a number of the spare parts required for each MBR module.
Filtrate Tube
Element Fixing Gasket
Swipe to see the rest
Name | Type No. | Frequency | ||
---|---|---|---|---|
Filtrate Tube | EBL-TUBE-200 (200 pcs) | Every 3 years or when deterioration detected, whichever comes first. | ||
EBL-TUBE-100 (100 pcs) | ||||
Element Fixing Gasket |
TMR140-100S TMR140-200D TMR140-400DW |
Middle | GASKET140-100M | Every 3 years or when deterioration detected, whichever comes first. |
Side | GASKET140-100S | |||
Element | TSP-50150 | When the specified filtration flux is not gained even after chemical cleaning or when deteriorated. |
Swipe to see the rest
Name | Type No. | Frequency | ||
---|---|---|---|---|
Filtrate Tube | EBL-TUBE-200 (200 pcs) | Every 3 years or when deterioration detected, whichever comes first. | ||
EBL-TUBE-100 (100 pcs) | ||||
Element Fixing Gasket | TMR090-100S | Middle | GASKET090-100M | Every 3 years or when deterioration detected, whichever comes first. |
Side | GASKET090-100S | |||
Element | TSP-50100 | When the specified filtration flux is not gained even after chemical cleaning or when deteriorated. | ||
Air Diffuser | TMR090 100S | Length 762mm | DIFFUSER090-050S | When the rubber is deteriorated or the aeration holes is plugged severely. |
Length 682mm | DIFFUSER090-100S |
Toray MBR Module Warranty & Conditions
Warranties and conditions for MBR Module are available on request because they strongly depend on process conditions.